Skip to content
Handhills Cabinets shows how capable their machinery really is

The CKCA Directory

For a list of all CKCA members, check out our member directory.

Member Directory
Handhills Cabinets shows how capable their machinery really is

Handhills Cabinets, is  a proud member of CKCA based in Hanna, Alberta.

Recently they had a large commercial job that required plywood shelving.

With solid 3/4 strip wood on the front edges,– vs just some thin PVS edge, and without the options on this machine, Handhills admits they could not have bid on the job. What they found different about the machine is that only larger and really heavy duty machines can actually apply an edge that thick ( 3/4″ ) most only go to ( 3/8″ ) or smaller. The unit in video 3– is again a unit found only on larger machines, so they would never want to do without it, –unless you only ever want to straight kitchen cabinets.

Handhills Cabinets says “If you do both residential and commercial, it pays to spend a little more on a machine with more options.”

Video 1 – Feeding in and applying 3/4″ thick solid lumber to apply onto a commercial shelving job, using waterproof PUR adhesive.
Video 2 – Showing front and back trim cutting off excess overhand
Video 3 – Rough trimmer units – trimming applied piece flush to panel
Video 4 – Profile units putting a smaller chamfer edges